| ATTACHMENT METHOD | MOUNTING HOLE |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.290 INCHES AXIALLY THROUGH HUB, FIRST END |
| BORE NOMINAL DIAMETER | 0.220 INCHES BOTH ENDS |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.015 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DIAMETER | 0.220 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.405 INCHES |
| HELIX ANGLE | 9.0000 DEGREES |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| HUB NOMINAL DIAMETER | 0.365 INCHES BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL |
| MOUNTING HOLE NOMINAL DIAMETER | 0.045 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.015 INCHES BOTH ENDS |
| NOMINAL OUTSIDE DIAMETER | 0.523 INCHES |
| PITCH DIAMETER | 0.4746 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 6 OR QUALITY NUMBER 7 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH TYPE | SINGLE HELIX |
| TEETH QUANTITY | 15 |
| TOOTH DIRECTION | LEFT |
| TOOTH FORM | STANDARD |