| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| HUB NOMINAL DIAMETER | 0.650 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.500 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303SE,COND A/CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303SE OVERALL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.266 INCHES FIRST END |
| NOMINAL OVERALL LENGTH | 0.453 INCHES |
| PITCH DIAMETER | 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | OUTSIDE DIAMETER 1.5263MIN 1.5278MAX IN.; BORE PROVISION INCLUDED; BORE DIAMETER 0.375MIN 0.3753MAX IN.; BORE LENGTH 0.453 IN.; FIRST END DISTANCE FROM END OF HUB TO CENTER OF TAPPED HOLE 0.175 IN.; CIRCULAR PITCH 0.04363 IN.; STYLE:PLAIN,HUBS UNEQUAL LENGTH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 108 |
| TOOTH FORM | STANDARD |