| ATTACHMENT METHOD | MOUNTING HOLE |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.323 INCHES BOTH ENDS |
| NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.352 INCHES |
| NOMINAL OUTSIDE DIAMETER | 3.4792 INCHES |
| NOMINAL OVERALL LENGTH | 0.800 INCHES |
| PITCH DIAMETER | 3.4375 INCHES NOMINAL |
| PRESSURE ANGLE | 14.5000 DEGREES |
| STYLE DESIGNATOR | FIXED TORQUE, SPRING WASHER LOADED |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 165 |
| TORQUE CAPACITY | 32.00 INCH-OUNCES PRESET |
| TOOTH FORM | STANDARD |