| BODY STYLE | WEBBED, WITH LIGHTENING HOLES |
| BORE NOMINAL DIAMETER | 0.240 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.530 INCHES SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 0.2670 INCHES SECOND END |
| END NOMINAL DIAMETER | 0.315 INCHES FIRST END |
| END NOMINAL LENGTH | 0.275 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.4000 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.450 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.490 INCHES FIRST END |
| HARDNESS RATING | 83.0 ROCKWELL A NOMINAL OVERALL |
| HUB SPLINE PITCH DIAMETER | 0.4687 INCHES NOMINAL SECOND END |
| HUB SPLINE QUANTITY | 15 SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | EXTERNALLY SPLINED, INVOLUTE SPLINES SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP E9310 OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.543 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.765 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.9309 INCHES |
| NOMINAL OVERALL LENGTH | 1.7700 INCHES |
| PITCH ANGLE | 17.0000 DEGREES |
| PITCH DIAMETER | 2.8182 INCHES NOMINAL |
| PRESSURE ANGLE | 16.0000 DEGREES |
| STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS |
| TEETH QUANTITY | 31 |
| TEETH TYPE | SPIRAL |
| TOOTH DIRECTION | LEFT |