| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE NOMINAL DIAMETER | 30.0 MILLIMETERS AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 6 PLAIN AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 30.5 MILLIMETERS BOTH ENDS |
| NOMINAL OUTSIDE DIAMETER | 348.9 MILLIMETERS |
| SPLINE PITCH DIAMETER | 100.0 MILLIMETERS NOMINAL BOTH ENDS |
| SPLINE QUANTITY | 63 BOTH ENDS |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 62 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | RIGHT |
| TOOTH FORM | STANDARD |
| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, WITH LIGHTENING HOLES |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 200.0 MILLIMETERS AXIALLY THROUGH BODY, FIRST END |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BORE NOMINAL DIAMETER | 101.8 MILLIMETERS BOTH ENDS |
| END NOMINAL DIAMETER | 127.4 MILLIMETERS BOTH ENDS |
| END NOMINAL LENGTH | 27.0 MILLIMETERS BOTH ENDS |
| FACE NOMINAL WIDTH | 51.0 MILLIMETERS |
| FIRST STEP NOMINAL DIAMETER | 140.0 MILLIMETERS BOTH ENDS |
| FIRST STEP NOMINAL LENGTH | 1.7 MILLIMETERS BOTH ENDS |
| HELIX ANGLE | 18.0000 DEGREES |
| HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS |
| III MATERIAL | STEEL OVERALL |
| PITCH DIAMETER | 324.5 MILLIMETERS NOMINAL |