|
|
|
National Stock Number:
3020-01-188-3781
Federal Supply Class:
3020
National Item Identification Number:
011883781
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 363D167-1 | 17472 | EATON AEROSPACE LLC | | 363D167-1 | 72121 | EATON MOTOR SITE |
|
Techincal Specification:
| MATERIAL | STEEL COMP E9310 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL H NOMINAL OVERALL | | TEETH QUANTITY | 46 | | TEETH TYPE | STRAIGHT | | TOOTH DIRECTION | RIGHT | | PRESSURE ANGLE | 20.0000 DEGREES | | PITCH ANGLE | 60.0000 DEGREES | | BACKLASH DESIGNATION | GRADE C | | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS | | PITCH DIAMETER | 1.4375 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 0.720 INCHES | | NOMINAL OUTSIDE DIAMETER | 1.4580 INCHES | | FACE NOMINAL WIDTH | 0.250 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0950 INCHES FIRST END | | 0.310 INCHES SECOND END | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 0.237 INCHES BOTH ENDS | | SPLINE QUANTITY | 11 BOTH ENDS | | SPLINE PITCH DIAMETER | 0.2292 INCHES NOMINAL BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END | | 0.375 INCHES SECOND END | | BODY STYLE | WEBBED, SOLID | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17472 | | DESIGN CONTROL REFERENCE | 363D167-1 |
|
|