| END NOMINAL DIAMETER | 0.034 INCHES FIRST END |
| END NOMINAL DIAMETER | 0.034 INCHES SECOND END |
| END NOMINAL LENGTH | 0.100 INCHES FIRST END |
| END NOMINAL LENGTH | 0.100 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.142 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.093 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 0.093 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.050 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.140 INCHES FIRST END |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HUB STYLE DESIGNATOR | 2 STEPS BOTH ENDS |
| III MATERIAL | STEEL COMP 416 OVERALL |
| PITCH DIAMETER | 0.6460 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 9 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.244 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.334 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.667 INCHES |
| SECOND STEP NOMINAL DIAMETER | 0.187 INCHES FIRST END |
| SECOND STEP NOMINAL DIAMETER | 0.187 INCHES SECOND END |
| SECOND STEP NOMINAL LENGTH | 0.094 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.094 INCHES SECOND END |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 62 |
| TOOTH FORM | STANDARD |