|
|
|
National Stock Number:
3020-01-193-7342
Federal Supply Class:
3020
National Item Identification Number:
011937342
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 772365 | 96214 | RAYTHEON COMPANY | | 772365-10 | 96214 | RAYTHEON COMPANY | | MZ3E-50-AP1 | 00348 | MICROTRAN CO INC | | DMZ3ET50AP1 | 01351 | SOUTHERN GEAR & MACHINE INC | | SXPABC25-50 | 23266 | SECS, INC. | | AC647TS50 | 29440 | W. M. BERG INC |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.104 INCHES | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.187 INCHES FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 0.8125 INCHES | | PITCH DIAMETER | 0.7812 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE HUB | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 50 | | TOOTH FORM | STANDARD |
|
|