| DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION | 0.300 INCHES NOMINAL AA END |
| DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION | 0.300 INCHES NOMINAL AA END |
| DRILLED HOLE DIAMETER | 0.159 INCHES NOMINAL |
| BORE FEATURE | NOT INCLUDED |
| DESIGN FORM | WEBBED |
| FACE WIDTH | 0.660 INCHES NOMINAL |
| FIRST STEP FACE LARGEST DIAMETER AND LOCATION | 1.313 INCHES NOMINAL AA END |
| FIRST STEP LENGTH AND LOCATION | 0.050 INCHES NOMINAL AA END |
| FLANGE LOCATION | INSIDE AND OUTSIDE |
| FLANGE QUANTITY | 2 |
| HOLE LOCATION | 2ND END,0.850 IN. LG |
| HUB END OUTSIDE DIAMETER AND LOCATION | 1.313 INCHES NOMINAL AA END |
| HUB END OUTSIDE DIAMETER AND LOCATION | 1.200 INCHES NOMINAL AA END |
| INTEGRAL COOLING VANE | NOT INCLUDED |
| LIGHTENING HOLE | NOT INCLUDED |
| OUTSIDE DIAMETER | 1.620 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.620 INCHES NOMINAL |
| OVERALL LENGTH | 1.010 INCHES NOMINAL |
| SPECIAL FEATURES | 60 DEG WEDGE CUT FROM OUTER EDGE TO CENTER,0.190 R AT POINT;2 TAP DRILLED HOLES IN WEDE SIDE 0.330 IN. DEEP,CSK 82 DEGX0.157 IN. DIA,0.138-32 UNC 2BX0.220 MIN. FULL THREAD |
| PROTRUDING HUB CHARACTERISTIC | STEPPED |
| RIM TYPE | SOLID |
| SECOND STEP LENGTH AND LOCATION | 0.250 INCHES NOMINAL AA END |
| SECURING HOLE QUANTITY | 3 |
| SECURING LOCATION | BB END |
| SECURING METHOD | DRILLED HOLE |
| SPLIT HUB FEATURE | NOT INCLUDED |
| STYLE DESIGNATOR | PLAIN |
| WEB/SPOKE RELATIONSHIP TO FACE CENTERLINE | OFFSET |
| SURFACE TREATMENT | ANODIZE |