|
|
|
National Stock Number:
3020-01-298-6777
Federal Supply Class:
3020
National Item Identification Number:
012986777
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 10029100 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 0.530 INCHES FIRST END | | BORE STYLE | INVOLUTE SPLINE SECOND END | | FACE NOMINAL WIDTH | 0.400 INCHES | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 0.670 INCHES SECOND END | | HUB NOMINAL DIAMETER | 0.740 INCHES FIRST END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A322 ASSN STD 1ST MATERIAL RESPONSE OR ASTM-A331 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.100 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.570 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.660 INCHES | | NOMINAL OVERALL LENGTH | 0.900 INCHES | | PITCH ANGLE | 45.0000 DEGREES | | PITCH DIAMETER | 2.5000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPLINE PITCH DIAMETER | 0.4688 INCHES NOMINAL SECOND END | | SPLINE QUANTITY | 15 SECOND END | | STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | TEETH QUANTITY | 22 | | TEETH TYPE | STRAIGHT |
|
|