| ATTACHMENT METHOD | MOUNTING HOLE |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN MOUNTING HOLES | 3.500 INCHES TRANSVERSELY THROUGH BOTTOM |
| FACE NOMINAL WIDTH | 2.000 INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B150 NATIONAL SPEC ALL MATERIAL RESPONSES CLAMP |
| III MATERIAL | ALUMINUM AND NICKEL AND BRONZE BODY |
| PITCH HEIGHT | 1.3330 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE NOMINAL DIAMETER | 0.220 INCHES TRANSVERSELY THROUGH BOTTOM |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.360 INCHES TRANSVERSELY THROUGH BOTTOM |
| MOUNTING HOLE TYPE AND QUANTITY | 6 PLAIN TRANSVERSELY THROUGH BOTTOM |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH BOTTOM |
| NOMINAL DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.500 INCHES TRANSVERSELY THROUGH BOTTOM |
| NOMINAL DISTANCE FROM MOUNTING HOLE CENTER TO BOTTOM | 0.250 INCHES TRANSVERSELY THROUGH BOTTOM |
| NOMINAL THICKNESS | 1.500 INCHES |
| NOMINAL OVERALL LENGTH | 8.000 INCHES |
| STYLE DESIGNATOR | SQUARE OR RECTANGULAR |
| TEETH QUANTITY | 15 |
| TEETH TYPE | SPUR |