5826-00-110-4365 INDICATOR,RADIO-MAGNETIC COMPASS Index 5998-00-110-4375 ITEM CONSUMABLE

National Stock Number:
3040-00-110-4368

Federal Supply Class:
3040

National Item Identification Number:
001104368

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.


Manufacturer Information:
32294762983EATON AEROSPACE, LLC


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FIRST END SPLINE LENGTH0.435 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER0.3540 INCHES MINIMUM AND 0.3620 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER0.2810 INCHES MINIMUM AND 0.2830 INCHES MAXIMUM
FIRST END SPLINE QUANTITY10
FIRST END STYLESPLINED (INVOLUTE)
FIRST END PITCH DIAMETER0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM
FIRST END PRESSURE ANGLE30.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONVS1-1-2-1,62983 MFR REF SINGLE MATERIAL RESPONSE
MATERIALSTEEL
OVERALL LENGTH1.420 INCHES NOMINAL
SECOND END DIAMETER0.5200 INCHES MINIMUM AND 0.5400 INCHES MAXIMUM
SECOND END PITCH DIAMETER0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM
SECOND END PRESSURE ANGLE30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER0.5260 INCHES MINIMUM AND 0.5360 INCHES MAXIMUM
SECOND END SPLINE QUANTITY12
SECOND END STYLESPLINED (INVOLUTE)
SURFACE FINISH125.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us