|
|
|
National Stock Number:
3040-00-242-8893
Federal Supply Class:
3040
National Item Identification Number:
002428893
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 177947PC8 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM | | HOLE DIAMETER AND LOCATION | 0.0700 INCHES NOMINAL 2ND HOLE | | LARGEST DIAMETER LENGTH | 0.060 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 416, COND A-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | NOMINAL THREAD SIZE | 0.138 INCHES THREAD | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE AND UNTHREADED 2ND HOLE | | SMALL END DIAMETER | 0.380 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND STEPPED | | THICKNESS | 0.250 INCHES NOMINAL |
|
|