|
|
|
National Stock Number:
3040-00-245-6817
Federal Supply Class:
3040
National Item Identification Number:
002456817
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 511961PC8 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 511961PC9 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BORE DIAMETER | 0.5000 INCHES MINIMUM AND 0.5004 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-16782-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 | | SMALL END DIAMETER | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | ONE 0.059 INCH HOLE DRILLED THRU FLANGE | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE TREATMENT | PHOSPHATE | | THICKNESS | 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM |
|
|