|
|
|
National Stock Number:
3040-00-246-8250
Federal Supply Class:
3040
National Item Identification Number:
002468250
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3-13425-5 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 3-13425-5 | 40581 | AEROMAX INDUSTRIES, INC. | | 3-13425-5 | 4V995 | AEROPARTS MACHINING, LLC | | 3-13425-5 | 62810 | ACE AERONAUTICS LLC | | 3-13425-5 | 72724 | GENTEX CORP | | 3-13425-5 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT | | MATERIAL | STEEL COMP 17-4PH | | OVERALL LENGTH | 6.700 INCHES NOMINAL | | SECOND END DIAMETER | 1.497 INCHES MINIMUM AND 1.499 INCHES MAXIMUM | | SPECIAL FEATURES | CRITICAL SAFETY ITEM (CSI) |
|
|