|
|
|
National Stock Number:
3040-00-248-2487
Federal Supply Class:
3040
National Item Identification Number:
002482487
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 0101222-1 | 45402 | MEGGITT SAFETY SYSTEMS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.030 INCHES NOMINAL | | FIRST END DIAMETER | 0.1560 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1350 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0320 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | FSC APPLICATION DATA | WINCH AIRCRAFT,MOUNTED | | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL | | MATERIAL | STEEL COMP 303 | | OVERALL LENGTH | 1.485 INCHES NOMINAL | | SECOND END DIAMETER | 0.1870 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.1574 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 8 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END PITCH DIAMETER | 0.1720 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.1400 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.1870 INCHES NOMINAL | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|