|
|
|
National Stock Number:
3040-00-249-5704
Federal Supply Class:
3040
National Item Identification Number:
002495704
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 809967-5 | 29780 | MAG AEROSPACE INDUSTRIES, LLC | | 809967-5 | 92824 | MAG AEROSPACE INDUSTRIES INC. DBA MONOGRAMSYSTEMS DBA MONOGRAM SYSTEMS |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2435 INCHES MINIMUM AND 0.2445 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | BELT ASSY,ACFT | | LARGEST STEP DIAMETER | 0.2435 INCHES MINIMUM AND 0.2445 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 1.290 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1180 INCHES MINIMUM | | SECOND END GROOVE WIDTH | 0.0640 INCHES NOMINAL | | SECOND END DIAMETER | 0.1845 INCHES MINIMUM AND 0.1855 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.032 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|