|
|
|
National Stock Number:
3040-00-251-2081
Federal Supply Class:
3040
National Item Identification Number:
002512081
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 230538PC6 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.4375 INCHES MINIMUM AND 0.4379 INCHES MAXIMUM | | HOLE DIAMETER AND LOCATION | 0.1250 INCHES NOMINAL SINGLE HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS BS MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OUTSIDE DIAMETER | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | STYLE DESIGNATOR | PLAIN ROUND | | THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
|
|