|
|
|
National Stock Number:
3040-00-337-1386
Federal Supply Class:
3040
National Item Identification Number:
003371386
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 62079 | 03848 | ARMA DIV AMBAC INDUSTRIES INC | | 979-1B143 | 00607 | GAP INSTRUMENT CORP | | 979-1B143 | 07CR8 | ADVANCED LOGIC RESOURCES INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2300 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0310 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.219 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 20.406 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.750 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2300 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0310 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 4 |
|
|