|
|
|
National Stock Number:
3040-00-348-0813
Federal Supply Class:
3040
National Item Identification Number:
003480813
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| D1-101 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | D1-101 | 3CPE0 | SAFRAN POWER USA LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END GROOVE DIAMETER | 0.3500 INCHES MINIMUM AND 0.3540 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0280 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.059 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | FSC APPLICATION DATA | PLANETARY ACTUATOR,ACFT | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 0.718 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END FLAT LENGTH | 0.062 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3620 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0630 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.593 INCHES NOMINAL | | SECOND END STYLE | FLATTED | | STEP QUANTITY | 3 |
|
|