|
|
|
National Stock Number:
3040-00-348-0828
Federal Supply Class:
3040
National Item Identification Number:
003480828
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 21172 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | 21172 | 3CPE0 | SAFRAN POWER USA LLC | | 21172-01 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | 21172-01 | 3CPE0 | SAFRAN POWER USA LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.2910 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 13 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 0.2537 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.3190 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.2910 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.1995 INCHES NOMINAL | | FSC APPLICATION DATA | ACTUATOR ACFT | | LARGEST STEP DIAMETER | 0.390 INCHES NOMINAL | | OVERALL LENGTH | 2.945 INCHES NOMINAL | | MATERIAL | STEEL | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|