|
|
|
National Stock Number:
3040-00-354-1379
Federal Supply Class:
3040
National Item Identification Number:
003541379
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5176208 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | PC5176208 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9845 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.9150 INCHES MINIMUM AND 0.9250 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.125 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 1.375 INCHES NOMINAL | | OVERALL LENGTH | 5.438 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END GROOVE DIAMETER | 1.1030 INCHES MINIMUM AND 1.1110 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0780 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM | | SECOND END DIAMETER | 1.1811 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.125 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 4 |
|
|