|
|
|
National Stock Number:
3040-00-356-6973
Federal Supply Class:
3040
National Item Identification Number:
003566973
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 611406 | 60807 | MAGNA TECH ELECTRONIC CO INC | | 711406 | 60807 | MAGNA TECH ELECTRONIC CO INC | | SCB338596 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SCB77281 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2498 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2300 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1870 INCHES NOMINAL | | FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.982 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.094 INCHES NOMINAL | | FIRST END STYLE | TWO CIRCULAR GROOVES | | OVERALL LENGTH | 3.218 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END GROOVE DIAMETER | 0.2300 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1870 INCHES NOMINAL | | SECOND END DIAMETER | 0.2498 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.282 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.968 INCHES NOMINAL | | SECOND END STYLE | TWO CIRCULAR GROOVES | | SPECIAL FEATURES | BOTH ENDS CHAMFERED 0.015 IN. BY 45 DEG | | SURFACE FINISH | 63.0 MICROINCHES |
|
|