|
|
|
National Stock Number:
3040-00-360-1636
Federal Supply Class:
3040
National Item Identification Number:
003601636
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 67738 | 59211 | PARKER-HANNIFIN CORPORATION | | 67738 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7450 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 COMP 630 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.625 INCHES NOMINAL | | SECOND END DIAMETER | 0.6310 INCHES MINIMUM AND 0.6360 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.922 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6310 INCHES MINIMUM AND 0.6360 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5260 INCHES MINIMUM AND 0.5360 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 12 | | SPECIAL FEATURES | FIRST END HAS INTERNAL SPLINES,11 TEETH,MAJ DIA 0.6000 MIN 0.6100 MAX IN.,MINOR DIA 0.5047 MIN 0.597 MAX IN. | | STEP QUANTITY | 7 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|