|
|
|
National Stock Number:
3040-00-364-3092
Federal Supply Class:
3040
National Item Identification Number:
003643092
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5150241 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5168131 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | K-5193476 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | 5193476 | 24617 | GENERAL MOTORS CORP | | 5193476 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | PC5193476 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8720 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.872 INCHES NOMINAL | | OVERALL LENGTH | 11.938 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 48 SERRATIONS EQUALLY SPACED ON BOTH ENDS OF SHAFT,0.872 IN. MAJ DIA,0.812 IN. MINOR DIA,0.719 IN. LG FIRST END,1.469 IN. LG SECOND END;SECOND END FLAT GROOVED 0.406 IN. DISTANCE FROM END TO FLAT,0.500 IN. LG,0.188 IN. DP;SECOND END BORED 0.875 IN. DP,0.266 IN. DIA;SECOND END COUNTER BORED 0.688 IN. DP,0.312 IN. DIA;SECOND END INTERNAL THDS SQ TO 0.234 IN.,0.562 IN. DP OF FULL SQ | | SECOND END GROOVE DIAMETER | 0.7190 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0700 INCHES NOMINAL | | SECOND END DIAMETER | 0.8720 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.719 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 0.688 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|