|
|
|
National Stock Number:
3040-00-364-3829
Federal Supply Class:
3040
National Item Identification Number:
003643829
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 3230625 | 55380 | HATCH & KIRK, INC. | | 3230625 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV | | 81125S41-21161PC3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 81125S41-35361PC3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 81125S41-35361PC3 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 81125S41-21161PC3 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | AVP10S41-071PC2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DD445S6100-887C2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DD453S61-01318PC2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | SS198S41-597PC2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DD453S61-01318PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SS198S41-0597PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | DD445S6100-887PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | AVP10S41-071PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SS212S41-0596PC2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | SS253S41-0596PC2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | SS253S41-0596PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SS212S41-0596PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9980 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | OVERALL LENGTH | 5.312 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.406 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL | | SECOND END DIAMETER | 0.9980 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END HOLE DIAMETER | 0.2960 INCHES NOMINAL | | SECOND END SLOT DEPTH | 0.125 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.125 INCHES NOMINAL |
|
|