|
|
|
National Stock Number:
3040-00-370-1483
Federal Supply Class:
3040
National Item Identification Number:
003701483
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 152447 | 06KW9 | LUCENT TECHNOLOGIES INC DBA FEDERAL MARKETING GROUP | | 152447 | 57712 | TELEMECHANICS INC | | 152447 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | 152447 | 65325 | DAYTEL MFG INC | | 7308 | 95692 | EDO ARTISAN INC | | 7308C001 | 95692 | EDO ARTISAN INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.1840 INCHES NOMINAL | | FIRST END DIAMETER | 0.31275 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.0620 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1440 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | FSC APPLICATION DATA | TELETYPE AND FACSIMILE EQUIPMENT | | LARGEST STEP DIAMETER | 0.4375 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 14.359 INCHES NOMINAL | | SECOND END DIAMETER | 0.3740 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | WEARING EDGES ARE BEVELED 0.010 IN.; SEVEN DRILLED HOLES; TWO ARE 0.116 IN. DIA; FIVE ARE 0.144 IN. DIA; TWO TAPS 0.144 IN. DIA; 0.125 IN. DEEP; TAPS SPACED 2.914 IN. C TO C | | STEP QUANTITY | 5 | | SURFACE FINISH | 100.0 MICROINCHES |
|
|