|
|
|
National Stock Number:
3040-00-381-7231
Federal Supply Class:
3040
National Item Identification Number:
003817231
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 177924 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 177924PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.0935 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.300 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 5.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-853,CLASS 6A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 0.1065 IN. DIA THUR HOLE,2.380 IN. HOLECENTER TO FIRST END | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1065 INCHES NOMINAL | | SECOND END DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | SECOND END STYLE | UNTHREADED CROSS DRILLED |
|
|