|
|
|
National Stock Number:
3040-00-381-8541
Federal Supply Class:
3040
National Item Identification Number:
003818541
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 493661PC2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 493661PC2 | 89954 | BAE SYSTEMS CONTROLS INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1884 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0635 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 2.062 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 11-S-T MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL | | SECOND END DIAMETER | 0.2504 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DIAMETER | 0.0635 INCHES NOMINAL | | STEP QUANTITY | 1 |
|
|