|
|
|
National Stock Number:
3040-00-383-6744
Federal Supply Class:
3040
National Item Identification Number:
003836744
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 431NC6107 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | 431NC6107 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | 737124 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | 737124 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | 431NC6107 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 431NC6107 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | NH6688PC431 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | NH7407PC431 | 0BR59 | SIEMENS GOVERNMENT TECHNOLOGIES, INC. | | NH7407PC431 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | NH6688PC431 | 82328 | DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE | | NH6688PC431 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 737124 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 737124 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | NH6688PC431 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | NH7407PC431 | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | NH7407PC431 | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.5605 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.563 INCHES NOMINAL | | OVERALL LENGTH | 1.375 INCHES NOMINAL | | MATERIAL | STEEL | | STEP QUANTITY | 2 |
|
|