|
|
|
National Stock Number:
3040-00-388-2962
Federal Supply Class:
3040
National Item Identification Number:
003882962
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 16102287 | 7PZX0 | FAIRBANKS MORSE, LLC | | 16102287 | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE | | CAFB5654A | 7PZX0 | FAIRBANKS MORSE, LLC | | NAFB5654A | 7PZX0 | FAIRBANKS MORSE, LLC | | NAFB5654A | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE | | CAFB5654A | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.0000 INCHES NOMINAL | | FIRST END STYLE | SLOTTED | | FIRST END SLOT DEPTH | 0.125 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.188 INCHES NOMINAL | | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 7.250 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.313 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 1.625 INCHES NOMINAL | | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | STEP QUANTITY | 4 |
|
|