|
|
|
National Stock Number:
3040-00-388-9574
Federal Supply Class:
3040
National Item Identification Number:
003889574
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 8020871 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.1880 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | HOLE DIAMETER AND LOCATION | 0.0520 INCHES NOMINAL 2ND HOLE | | OUTSIDE DIAMETER | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 303, COND A-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | NOMINAL THREAD SIZE | 0.112 INCHES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE AND UNTHREADED 2ND HOLE | | STYLE DESIGNATOR | PLAIN ROUND | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
|
|