| END SIMILARITY | NOT IDENTICAL |
| FSC APPLICATION DATA | MOUNT,TELESCOPE |
| MATERIAL | STEEL CORROSION RESISTING |
| OVERALL LENGTH | 3.219 INCHES NOMINAL |
| SPECIAL FEATURES | A 1/4 IN. RADIUS SLOT,0.125 IN. WIDE,0.187 IN. DEEP,0.080 IN HIGH,LOCATED ON EDGE OF WORM THREADED SECTION |
| SHAFT HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| STRAIGHT UNTHREADED LENGTH | 0.125 INCHES NOMINAL ALL THREADED PORTIONS |
| STRAIGHT UNTHREADED LENGTH | 0.305 INCHES NOMINAL RECEPTACLE PLATE |
| STRAIGHT UNTHREADED LENGTH | 0.870 INCHES MINIMUM FIRST MORTISE |
| STRAIGHT UNTHREADED LENGTH | 0.880 INCHES MAXIMUM SECOND MORTISE |
| STRAIGHT UNTHREADED LENGTH | 1.159 INCHES NOMINAL D ENTRANCE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.249 INCHES NOMINAL FIRST MORTISE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.312 INCHES NOMINAL D ENTRANCE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.390 INCHES MINIMUM RECEPTACLE PLATE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.400 INCHES MAXIMUM SEPARATING PIN |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.500 INCHES NOMINAL ALL THREADED PORTIONS |
| SURFACE TREATMENT | PASSIVATE |
| TEETH HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| WORM BODY LENGTH | 0.750 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 2 DEG 45 MIN |
| WORM OUTSIDE DIAMETER | 0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| WORM PITCH DIAMETER | 0.461 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.070 INCHES NOMINAL |
| WORM THREAD QUANTITY | 1 |
| WORM THREAD SECTION LENGTH | 0.750 INCHES NOMINAL |