| CRITICALITY CODE JUSTIFICATION | CFFC AND CFFK |
| END SIMILARITY | NOT IDENTICAL |
| FSC APPLICATION DATA | TELESCOPE,PANORAMIC M100S |
| MATERIAL DOCUMENT AND CLASSIFICATION | NITRALLOY MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL UNS J24056 |
| OVERALL LENGTH | 2.336 INCHES MINIMUM AND 2.356 INCHES MAXIMUM |
| SHAFT HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| STRAIGHT UNTHREADED LENGTH | 0.296 INCHES NOMINAL FIRST MORTISE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1562 INCHES MINIMUM D ENTRANCE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1566 INCHES MAXIMUM E ENTRANCE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1876 INCHES MAXIMUM AXIALLY AT EACH END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1876 INCHES MAXIMUM FIRST STEP |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1873 INCHES MINIMUM ALL THREADED PORTIONS |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.1873 INCHES MINIMUM TERMINAL BOX |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.240 INCHES MINIMUM RECEPTACLE PLATE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.240 INCHES MINIMUM FIRST MORTISE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.260 INCHES MAXIMUM SECOND MORTISE |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.260 INCHES MAXIMUM SEPARATING PIN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | OXIDE |
| TEETH HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM |
| WORM BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 3 DEG 38 MIN 33 SEC |
| WORM OUTSIDE DIAMETER | 0.3697 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.3279 INCHES NOMINAL |
| WORM THREAD DIRECTION | LEFT-HAND |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.0656 INCHES NOMINAL |
| WORM THREAD QUANTITY | 1 |
| WORM THREAD SECTION LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |