|
|
|
National Stock Number:
3040-00-585-9162
Federal Supply Class:
3040
National Item Identification Number:
005859162
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 9078838 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| BORE DIAMETER | 0.252 INCHES MINIMUM AND 0.253 INCHES MAXIMUM | | BORE LENGTH | 0.250 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 0.500 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | LINK END THICKNESS | 0.250 INCHES NOMINAL | | OVERALL WIDTH | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-327, T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SHAFT END THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | TWO NO. 6-32 UNC THD SECURING HOLES ON SHAFT END,HOLES @SPACED 90 DEG APART | | STYLE DESIGNATOR | FLAT, ONE HOLE LINK END | | SURFACE TREATMENT | ANODIZE |
|
|