|
|
|
National Stock Number:
3040-00-591-6703
Federal Supply Class:
3040
National Item Identification Number:
005916703
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 154397 | 57712 | TELEMECHANICS INC | | 154397 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | 154397 | 65325 | DAYTEL MFG INC | | 7349 | 95692 | EDO ARTISAN INC | | 7349C001 | 95692 | EDO ARTISAN INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.187 INCHES NOMINAL | | FIRST END DIAMETER | 0.3125 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1380 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.437 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.562 INCHES NOMINAL | | SECOND END DIAMETER | 0.3743 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0310 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1380 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.116 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.229 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3600 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | STEP QUANTITY | 8 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|