|
|
|
National Stock Number:
3040-00-613-2020
Federal Supply Class:
3040
National Item Identification Number:
006132020
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 7392868 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.8750 INCHES NOMINAL | | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | 0.871 INCHES NOMINAL | | HOLE DIAMETER AND LOCATION | 0.2500 INCHES NOMINAL SINGLE HOLE | | INTERNAL KEYWAY WIDTH | 0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | KEYWAY QUANTITY | 1 | | LARGEST DIAMETER LENGTH | 0.500 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.985 INCHES MINIMUM AND 1.988 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634, COMP 1018-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1018 | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | SMALL END DIAMETER | 1.364 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE TREATMENT | PAINT | | THICKNESS | 1.250 INCHES NOMINAL |
|
|