|
|
|
National Stock Number:
3040-00-626-1737
Federal Supply Class:
3040
National Item Identification Number:
006261737
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 1483N | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE | | HL17264PC64X65 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PIN712A | 0AT62 | SIEMENS ENERGY, INC. | | PIN712A | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PIN712A | 8FGX3 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORP | | PIN712A | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END HOLE DEPTH | 1.000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1880 INCHES NOMINAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.812 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 3.391 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | ONE HOLE IN C OF SHAFT 0.188 IN. DIA,1.000 IN. DP;TWO SLOTS,ONE ON EA END 0.125 IN. IN FROM END |
|
|