|
|
|
National Stock Number:
3040-00-630-0797
Federal Supply Class:
3040
National Item Identification Number:
006300797
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| APCG300-367 | 32970 | AIRCRAFT PARTS CORPORATION | | APCG300-367 | 95270 | SKURKA AEROSPACE INC | | G300-367 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | G300-367 | 3CPE0 | SAFRAN POWER USA LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5490 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.531 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 10.593 INCHES NOMINAL | | OVERALL LENGTH | 14.390 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 5 SPLINES TAPERED ON FIRST END | | SECOND END DIAMETER | 0.5490 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.250 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 1.094 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1562 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 6 | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
|
|