|
|
|
National Stock Number:
3040-00-701-2800
Federal Supply Class:
3040
National Item Identification Number:
007012800
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 3040PL1380028 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 7012800 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 805-1624071 PC5 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 805-1624073 PC5 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 805-1624075PC52 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 805-1624082 PC 52 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 8100-1252-0059 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1252-0060 PC N0 52 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1252-0060 PC NO 52 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1252-0061 PC 52 | 70876 | BATH IRON WORKS CORPORATION | | 805-1624090PC52 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 805-1645438 PC5 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 805-1645438PC52 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 8100-1252-0058 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | EJ-10089-4 | 20722 | THE ENTWISTLE COMPANY LLC |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.5000 INCHES MINIMUM AND 0.5080 INCHES MAXIMUM | | HOLE DIAMETER AND LOCATION | 0.1280 INCHES MINIMUM ALL HOLES AND 0.1330 INCHES MAXIMUM ALL HOLES | | OUTSIDE DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631, COMP 1010-CANCELED FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-631, COMP 1020-CANCELED FED SPEC 2ND MATERIAL RESPONSE AND QQ-S-634, COMP 1010-CANCELED FED SPEC 3RD MATERIAL RESPONSE AND QQ-S-634, COMP 1020-CANCELED FED SPEC 4TH MATERIAL RESPONSE AND QQ-S-698 FED SPEC 5TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | STYLE DESIGNATOR | PLAIN ROUND | | SURFACE FINISH | 125 MICROINCHES BOTH BEARING FLATS | | SURFACE FINISH | 125 MICROINCHES INSIDE PERIPHERY | | SURFACE TREATMENT | CADMIUM AND CHROMATE AND ZINC | | THICKNESS | 0.380 INCHES NOMINAL |
|
|