|
|
|
National Stock Number:
3040-00-702-8656
Federal Supply Class:
3040
National Item Identification Number:
007028656
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 7028656 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.4370 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ABXV | | HOLE DIAMETER AND LOCATION | 0.1285 INCHES NOMINAL SINGLE HOLE | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631, COMP 1010-CANCELED FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-631, COMP 1020-CANCELED FED SPEC 2ND MATERIAL RESPONSE AND QQ-S-634, COMP 1010-CANCELED FED SPEC 3RD MATERIAL RESPONSE AND QQ-S-634, COMP 1020-CANCELED FED SPEC 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE | | STYLE DESIGNATOR | PLAIN ROUND | | SURFACE FINISH | 125 MICROINCHES INSIDE PERIPHERY | | SURFACE TREATMENT | PHOSPHATE AND PHOSPHATE ZINC | | THICKNESS | 0.312 INCHES NOMINAL |
|
|