|
|
|
National Stock Number:
3040-00-720-3146
Federal Supply Class:
3040
National Item Identification Number:
007203146
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 9067085 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2502 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.046 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/5, ALLOY 2017, T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2017 | | NOMINAL THREAD SIZE | 0.086 INCHES ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SMALL END DIAMETER | 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM | | SURFACE FINISH | 125 MICROINCHES BOTH BEARING FLATS | | SURFACE FINISH | 125 MICROINCHES LARGEST OUTSIDE PERIPHERY | | SURFACE FINISH | 125 MICROINCHES OUTSIDE PERIPHERY | | SURFACE FINISH | 16 MICROINCHES INSIDE PERIPHERY | | SURFACE TREATMENT | ANODIZE | | THICKNESS | 0.344 INCHES NOMINAL |
|
|