|
|
|
National Stock Number:
3040-00-727-3837
Federal Supply Class:
3040
National Item Identification Number:
007273837
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 064-12173D003 | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC | | 64-12173D3 | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC | | 64-5581PL | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC | | 64-9930PC71 | 66935 | JOHNSON CONTROLS NAVY SYSTEMS, LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM | | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | FSC APPLICATION DATA | COMPRESSOR,RECIPROCATING,POWER DRIVEN | | LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL | | OVERALL LENGTH | 13.531 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20137 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | SPECIAL FEATURES | MILLED FLATS FOR WRENCH ON THIRD STEP | | STEP QUANTITY | 6 |
|
|