|
|
|
National Stock Number:
3040-00-728-1681
Federal Supply Class:
3040
National Item Identification Number:
007281681
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 164743 | 57712 | TELEMECHANICS INC | | 164743 | 70408 | AT AND T CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1120 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.0740 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.060 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.156 INCHES NOMINAL | | OVERALL LENGTH | 0.875 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM END TO GROOVE | 0.045 INCHES NOMINAL | | SECOND END DIAMETER | 0.1120 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0820 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|