|
|
|
National Stock Number:
3040-00-734-6750
Federal Supply Class:
3040
National Item Identification Number:
007346750
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 100105R1 | 31007 | NAVISTAR INTL CORP | | 100105R1 | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | 2345435 | 24617 | GENERAL MOTORS CORP | | 2345435 | 7X677 | GENERAL MOTORS LLC | | 316807 | H0001 | DAF TRUCKS N.V. | | 2520007346750 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7346750 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | KC2519 | 22852 | SPALLA INC | | KC2519 | 56442 | DIAMOND REO TRUCK CO | | 62-60-4 | 72447 | DANA COMMERCIAL VEHICLE MANUFACTURING, LLC | | 62-60-4 | 95019 | DANA CORP SPICER TRANSMISSION DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END FLAT DEPTH | 0.2813 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.622 INCHES NOMINAL | | FIRST END DIAMETER | 1.1875 INCHES NOMINAL | | FIRST END STYLE | FLATTED | | LARGEST STEP DIAMETER | 1.249 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | OVERALL LENGTH | 8.438 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A304-79 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4145 | | SECOND END DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 1.094 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.9880 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 4 |
|
|