|
|
|
National Stock Number:
3040-00-734-6892
Federal Supply Class:
3040
National Item Identification Number:
007346892
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3040007346892 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 3040007346892 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7346892 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | KC5291 | 56442 | DIAMOND REO TRUCK CO | | 3880M533 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 314285 | H0001 | DAF TRUCKS N.V. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL | | FIRST END DIAMETER | 1.5000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1563 INCHES NOMINAL | | FIRST END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 2.688 INCHES NOMINAL | | OVERALL LENGTH | 22.438 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4145 OR STEEL COMP 8640 | | STEP QUANTITY | 8 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|