|
|
|
National Stock Number:
3040-00-739-4349
Federal Supply Class:
3040
National Item Identification Number:
007394349
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 101122 | 15434 | CUMMINS INC. | | 2207-571 | 82181 | WILLIAM SPENCER |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5390 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4800 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.2400 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.230 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.5936 INCHES NOMINAL | | OVERALL LENGTH | 3.620 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.373 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4500 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2400 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.483 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL | | SECOND END DIAMETER | 0.5936 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.580 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END TO BE KNURLED FOR 1/2-35 S.A.E. SERRATIONS MAX DIA OF SERRATIONS .502;SECOND END DRILL THRU HOLE AT 48 DEG ANGLE W/DIA .173 | | STEP QUANTITY | 5 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|