|
|
|
National Stock Number:
3040-00-740-9644
Federal Supply Class:
3040
National Item Identification Number:
007409644
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5215794 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 5215794 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | 7409644 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | HCF1278 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278A | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278B | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278C | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278D | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278E | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278F | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278G | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF1278H | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | KC9347 | 53335 | UNIVERSAL LOGISTICS CORP CLARK DIV | | KC9347 | 56442 | DIAMOND REO TRUCK CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.6890 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | BOOM HOIST CABLE DRUM DRIVE TRUCK WRECKER,5 TON | | LARGEST STEP DIAMETER | 4.000 INCHES MINIMUM AND 4.001 INCHES MAXIMUM | | OVERALL LENGTH | 28.203 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI OR SAE 4340H OR 9840H ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 0.875 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0940 INCHES NOMINAL | | SECOND END DIAMETER | 1.2500 INCHES MINIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.219 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | STEP QUANTITY | 9 | | SURFACE FINISH | 59.0 MICROINCHES |
|
|