|
|
|
National Stock Number:
3040-00-752-1097
Federal Supply Class:
3040
National Item Identification Number:
007521097
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 2380T2 | 22852 | SPALLA INC | | 2380T2 | 56442 | DIAMOND REO TRUCK CO | | 7521097 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 30-67-20 | 72447 | DANA COMMERCIAL VEHICLE MANUFACTURING, LLC | | 30-67-20 | 95019 | DANA CORP SPICER TRANSMISSION DIV | | 3040007521097 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 914117 | 58275 | SASCO INC CANADIAN DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J403 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1045 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 15.750 INCHES NOMINAL | | SECOND END DIAMETER | 0.6230 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.435 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.3760 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.438 INCHES NOMINAL | | SECOND END STYLE | TONGUE AND CROSS DRILLED HOLE | | SECOND END TONGUE THICKNESS | 0.435 INCHES NOMINAL | | SECOND END TONGUE WIDTH | 0.623 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.938 INCHES NOMINAL | | SPECIAL FEATURES | THREE NOTCHES,1.031 IN. BETWEEN 1ST AND 2ND CENTERLINE,1.156 IN. BETWEEN 2ND AND 3RD CENTERLINE;TWO SETSCREW HOLES 0.375 IN. DIA BY 60 DEG C'SUNK |
|
|