|
|
|
National Stock Number:
3040-00-752-1099
Federal Supply Class:
3040
National Item Identification Number:
007521099
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 2362T2 | 22852 | SPALLA INC | | 2362T2 | 56442 | DIAMOND REO TRUCK CO | | 7521099 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 914118 | 58275 | SASCO INC CANADIAN DIV | | 30-67-21 | 95019 | DANA CORP SPICER TRANSMISSION DIV | | 2520007521099 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 CARBON 1045 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.906 INCHES NOMINAL | | SPECIAL FEATURES | 2ND END HAS 3 NOTCHES 0.1375 IN.,0.19454 IN.,AND 0.015 IN. RADIUS,246 DEG;CENTER HAS 0.375 IN. DIA BY 50 DEG C'SUNK HOLE;CASE HARDEN RC55-65 EXCEPT BOTTOM OF NOTCHES | | SURFACE FINISH | 50.0 MICROINCHES |
|
|